Jingle Bell Penguins And One More Christmas Critter

Just when I thought that I was done with carving "Simple Simon" the penguin as presents for this years Christmas season I came up with a new addition that I thought made a big improvement on an already nice project. As you can see in the picture to the left I simply added three small bells to the rear side of the penguins neck by using some thin red holiday ribbon. All of these supplies are readily available in the craft department of your favorite store. After securing the ribbons I then tied a final knot in the front leaving about an inch of ribbon on each side. I then rubbed the ribbon between my finger and the dull side of my knife blade for nice "swirls".

One more Christmas critter that was added to my collection yesterday was "Bessy The Red-Nosed Milking Cow". As mentioned in several previous postings this project started out as making miniature reindeer but the kids in my classes always come up with several new ideas each year thus adding to my showcase display for future classes. "Bessy" was the final creative brain explosion for this years class and it's already a favorite with everyone who gazes upon her hilarious construction.

Bessy was made just as all the other critters but if you look closely at her rear-right leg you'll see that it's slightly raised for "milking". There was also a slight knot on the underside of her belly where 6 tiny dowels were drilled into place in a circle to imitate her milking utters which were painted a light pink color. The rest of the deer was painted as a jersey milking cow with big black & white spots and a red fuzz nose added for Christmas. This one was just too much fun to make and perhaps she will inspire some new ideas for you too!

Woodshop Christmas Project #2- Reindeer & Christmas Critter's (part 3)

As you can see the annual Christmas critter's project has continued into it's last week and the last classes for this project was on Friday. Outside the woodshop the snow blizzard moving up the east coast from the Gulf of Mexico had already dumped 4 or 5 inches of snow on the ground outside the woodshop but since I have a 4-wheel drive Tacoma I stayed until the very last minute of the very last class because those kids would have been sorely disappointed if I'd left them with unfinished deer.

When you can look outside the woodshop windows and see snow falling in blizzard proportions it creates an ultimate Christmas time atmosphere. When the atmosphere is so conducive to the human spirit such as when the snow is falling, I'd swear that creativity in working with the hands is increased ten-fold. Maybe I'm wrong but perhaps I'm right because Friday's class sure did seem above average in spirit and creativity.

Although it's not exactly a "Christmas" deer the picture at the top/left shows the creation of Robert's bull. Robert was steadfast on the idea of putting together a bull so I allowed him complete creative freedom and we both ended up being thrilled with the end result of three classes. After he painted his bull black, added the eyes, and a red cape Robert thought that he was done but that is when I challenged him to extend it even further. With some thought I sketched him out some bull horns on a small piece of pine then after cutting and some carving Robert had the defining symbol of a bull. That addition inspired him to add some yellow pipe cleaners for even more accent, then it was completed with a tail made from a brown pipe cleaner with some twisted inner bark of a poplar tree hot glued on for the tail. I thought that his bull turned out just great and I know that he can't wait to show it off to his family in a few days. He even named him "Paco"!

Hands were busy today and it's also great to see the adults get involved with the kids crafting too as Chief Rachael is so adamantly focused on in the picture to the right. When the kids are having trouble focusing on the task at hand our counselors are usually quick to notice the need and their attention is focused on working directly with the kids to help ensure success. However when the group is running well it is a joy to have the counselors working on their projects too and that also can go a long way in building group cohesion.

Sometimes the kids just get completely crazy ("crazy" in a good way) when their creative juices get the best of them. The Mother Goose bird to the left is one such example of how hilarious this project can be for a group of youngsters. A small piece of red maple was used for this critter and the two lower legs were first roughed out on the bandsaw, then shaped up more with a pocket knife. At this point the legs could be mounted and glued into 1/4" holes drilled into the wooden stand.  Jack had a great time doing this bird but it wasn't too complicated since he desperately wanted some extra time for finishing up a nice kitchen cutting board that he's been working on for a month prior to the Christmas classes. I agreed to grant him this extra time but first I expected him to come up with a nice Christmas critter so we made a deal. Jack is one of my most ardent woodcarving students and most of his projects must have some kind of carving involved and this bird was no exception as he continued to fashion the head and beak. Jack completed his Christmas bird with a set of over sized googly eyes that looked more like sunglasses than eyes thus adding to the humor factor, then a spread of white tail feathers completed the project. Nice work Jack!

 As you can see from the picture to the right I have made several Christmas critters that I always display on the work table each year to give my students an idea of what they can do with just 7 or 8 simple sticks from a tree limb. Actually the Christmas moose that you see came from the mind of Seth, a student from last years class. Seth was determined to make "Rudolph the Red-Nosed Moose" so I helped him come up with a way to cut out the awkward shaped antlers with some fancy bandsaw maneuvering into a piece of 2 X 4. At the time I made a template for cutting out the moose antlers so that the kids can now easily understand how to go about fashioning their own. Another version of the Christmas bird in the picture to the far right is similar to Jack's bird however a nest was made for this one with two white fuzz balls added to imitate eggs. As you can see we have taken deer making to a whole new level that has certainly proven to intrigue the minds of both students and adults.

Woodshop Christmas Project #2- Reindeer & Christmas Critter's (part 2)

The Christmas critters classes have continued and as usual the kids have come up with even more original and creative ideas. It amazes me every year with how many new ideas can be visualized and created by my students and 2009 has seen the addition of several new Christmas "critters".

The deer that I'm showcasing in the picture to the right was made by Arturo and he finished it just this morning. In every class there's always one or two students who are so caught up in such laser beam concentration upon their project that it's fun for me to just look over their shoulders as the gears in their minds direct their hands into some great creations. Arturo was that student who didn't utter a word in todays class as he was so caught up in his deer. As you can see the white feathers that he hot glued in place really set off the antlers making it the dominant focal point when you look at his deer. Nice work Arturo!

Hands were busy again all week long on getting the miniature deer finished before Christmas break and so far it looks like we will stay right on schedule. The holiday woodshop classes alternated between working on the birdhouses and the Christmas critters so things are busy around our parts right now. It also amazes me to see how such a simple project can stimulate the minds of all age groups. Several of the counselors were also able to attend some of the woodshop classes this holiday session and it was hard to separate their enjoyment with making this project from that of the kids.

Another new creation that came out of this years holiday classes was "Rudolph the red-nosed horse" as the picture to the right explains. This critter came out of the mind of Anthony who had a hard time during his first several months in our program and his anger even prevented him from participating in his first woodshop class. As the days and months have passed by Anthony has become one of my best and most confident students and that is something that I'd never have predicted four or five months ago. It was a joy to work with Anthony on his idea to make a Christmas horse. As he progressed from one idea to another on turning his plan into a reality Anthony would usually ask my advice on how to solve a certain problem. We had such a great time, mostly laughing as such a hilariously new critter was created right before our eyes. It was such a great experience that I decided to make a small colt as you can see as the smaller critter in the picture to the right. Once again it's amazing how such a simple project can have such enormous power to foster positive relationships, muster up new-found confidence, and the capacity to help change lives for the better. Great job Anthony!

Quienten was another student who chose to exceed expectations in my woodshop class with his chillin' Christmas chicken as seen in the picture to the left. This was a top secret creation and I watched his progress through two classes before I completely understood what he was doing. I knew that he wanted to make some kind of bird but I wasn't so sure about Quienten's methods. Regardless, I kept the faith that he was on the right track and continued to allow him the creative freedom to continue as he always appeared so confident with his hands although I knew that his brain was occasionally straining to it's limits. In the end I must admit that I was both amazed and pleased at what he'd come up with and Quienten was so proud.

Woodshop Christmas Project #2- Reindeer & Christmas Critter's (part 1)

During the Christmas holiday season I decided to make all of our scouting classes an additional "bonus" woodshop session where the kids made miniature reindeer as presents for their family and friends. Since the early 1990's  we have always made the larger "log" type reindeer as a camp-wide Christmas project using the flaky barked river birch as the bodies and dowel rods for legs, but last year I came up with the miniature reindeer which has proven to be an even better (or at least more practical) project in my opinion.

The larger reindeer which had an average log body of about 4" diameter and a foot long was definitely a wonderful project however it required a small army of people to cut the logs, then we would make an average of 75 reindeer every Christmas. As you can imagine the logistics for making this particular project a success required a lot of staff time in gathering, preparation, then loading them onto a trailer for transportation to the Christmas bus stop. A seemingly simple Christmas craft had become quite an extensive operation and this is where the development of the miniature reindeer came to our rescue.

After some experimentation I developed the perfect solution by just scaling down our reindeer production to a more realistic size for a student body of approximately 60 kids and more than a dozen counselor staff. If there were ever a case for the saying that sometimes, "less is more" or that, "dynamite comes in small packages" then it would most certainly apply to this great little project. In my opinion I would now much rather have the smaller deer and it seems that you can get much more creative in making them too with the more compact sizing of the deer and the materials used to decorate them.

As the picture to the right shows I have a box with the small deer bodies, necks, and heads pre-cut before the class arrives and I also have a nice selection of smaller limbs that they can cut for legs. Since class time is limited I like to have these items prepped for the kids before class begins which also goes a long way to ensuring success. I begin the class with everyone around the center woodshop table with a short talk about expectations and a brief lesson on the mortise & tenon joinery method. I show them a poster of about ten different joinery methods used in woodwork then let them guess which one that we will be using on joining the deer together. It's a great introduction and sets the stage for better understanding the project at hand.

It's also very important to have an undecorated deer on the table that they can take apart for examination on learning how to assemble their deer. If you're going to lead this project with a group of kids then I can't express enough the importance of having a model deer available for them to touch, feel, and examine with their own hands. It will make a difference in a child's ability to build confidence for this project. Also have 3 or 4 completed deer sitting on the table which have been finished in different ways as this will spawn a lot of good original ideals in the child's mind before he starts.

During the lecture I also show the kids an example of a mortise and tenon joint made by a local furniture company used in producing chairs then explain that we're using a version of this same joining method but with our Christmas reindeer we'll be utilizing a more "rustic" version of this joint. This is a great introduction to one of the strongest joints used in woodworking and probably only the dove-tail joint is stronger.

After this I have the class gather around the drill press where I demonstrate how to line up their mortise holes in a no-fail method for their legs. The deer body is placed firmly in a "V" shaped slot that I cut out of a 2 X 4 so that the wood won't roll on the table while drilling thus making this procedure much safer. After drilling the first hole I then show them how to put my "dummy" leg stick in that hole so that they can then line up the other legs and easily determine exactly how much they wish to make the spread of the legs. Not only is this a good exercise and lesson in teaching sequential thinking as a way to solving a woodworking problem it is also a lesson that will benefit the child in learning ways to find positive resolutions to real life problems. When presented correctly, woodworking can be an enormously powerful tool for not only producing wonderful wooden projects but it will also lay a solid foundation for producing kids that have more confidence, a stronger character, and increased self esteem. Learning to work wood should be required curriculum in every elementary and middle school but sadly for the kids this isn't the standard by which a child's education is measured in today's world.

After a short demonstration on making good mortise holes with the drill press the class gathers at the belt/disc sander where I show them how to make their rustic joinery tenons. Most of this demonstration is centered around safety since skinning up a knuckle or fingernail isn't much fun. The points to remember and practice are to always rest the wood on the cast iron table while sanding, then turning the stick slowly while gradually sanding down a nice tenon. I also emphasize that the wood needs to always be held firmly with both hands and always be thinking about where your hand would go if it were to slip. We have amazingly few accidents in our woodshop program considering that approximately 60 kids pass through my woodshop classes each week. Creating an atmosphere of safety is absolutely essential and the most important aspect of any successful woodshop program.

So there you have it... the story about how the birth of our new miniature reindeer came about. This is a wonderful project for kids and I hope that you will share it with the children in your life. In the next posting I will begin to share all of the creative ideas that my students came up with and you will also learn a lot of new ideas that go a lot further than just reindeer. Kids can be amazingly creative... so much so that I now refer to this class as not making reindeer but the making of "Christmas Critters".