WIP: Nothing Like An "Ax In The Stump" (Part 2 of 2)

WIP="Work in Progress"

Continuing with the ax-in-the-stump carving project started here, you can see from the picture to the left how I first sawed out a series of "fins" on both sides of the ax head. I always like this part because it's fun to then flick them away with the blade of my jack knife.

Also notice that I purposely left as much wood intact on the underside of the blade for as long as I could during the carving of the ax. This would provide a much stronger foundation while carving and the disappointment of breaking it off the stump. When carving such fragile projects like this always think about ways to strengthen the wood while carving, whether it's leaving wood in weak areas like this until the last minute or even how you grip the wood while carving. The ax will be vulnerable for breaking from this point forward so keep that in mind as you carve and all will work out well.

In the picture to the right I continue roughing out the handle and head of the ax. Although you can't see it in the pictures, I also kept the "stump" part of the limb at least 6" long so that I could maintain a firm grip on the wood as I carved. The picture to the right appears to show my hand gripping only the tip of the stump but actually I've got a great grip on the long limb which I haven't yet trimmed. I'll do that when I've finished carving the ax. So many times I've had to correct my students who will start carving their project after cutting it out to the actual size. Always think about how you're going to grip the wood while carving, either with a table vise, your hands, or both during the planning phase. Carving should be a pleasure... not a struggle.

And here she is all carved, finished, and ready for a nice paint job. After carving I did so very lightly sand the ax with 220 grit sandpaper, but just a little because I wanted the carving to show.






Since I already have two red ax-in-the-stumps in my collection; one big and one small, I decided to paint this medium sized ax with blue acrylic paint. I painted a thin strip of metallic silver paint for the tip of the ax blade, then gave all the carved areas a couple coats of clear polyurethane. This is one of my funnest projects to carve and in addition to being a wonderful conversation piece it will also help you move to a new level in carving. Give it a try and have some fun!

WIP: Nothing Like An "Ax In The Stump" (Part 1 of 2)

WIP="Work in Progress"

This is one of those projects that has always amazed me, from the first time that I saw one and to the point when I knew that I had to try carving it  for myself. An ax in the stump is one of those carving projects that is sort of like a ball-in-the-cage... it's just interesting to admire, discuss, and most of all it's fun to carve.

On the other hand I'd also say that it isn't amazingly hard to carve, nor is it a simple project. I would class this one as "moderate" in skill level and also it can be cut out with a bandsaw or by hand using a coping saw. Be sure to read the cautions below if you choose to use the bandsaw.

Looking at the pictures to the left you can see that I've carved this project in several sizes, from the smallest one which was taken from a Jenga block which measures a mere 3" X 1" X 1/2" and that is very tiny. The larger one I carved from a basswood limb that had a 3" diameter. The wood used for my latest ax-in-the-stump (the blue ax) and the focus of this posting was a  seasoned piece of maple limb with a 2-1/4" diameter stump. This medium sized project or the larger one would be good choices for trying your hand at this interesting conversation piece.

As indicated in the picture to the right first you'll need to find a tree branch with an attached limb at about a 45 degree angle. Most limbs grow at this approximate angle so you shouldn't have much trouble finding one unless you live in Antarctica.

Since you're cutting round wood this will require adequate bandsaw experience as this type of cutting can create an unsafe situation. Bandsaws are made for cutting wood that has a firm squared grip on the cutting table so when cutting something "round" you greatly increase the potential for bending an expensive blade AND increasing the chance for bodily injury. Exercise extreme caution when cutting round wood with a bandsaw and don't do it if you have any reservation about your ability to control the cut. A safe and effective alternative would be to clamp your limb down securely then cut it out by hand using a coping saw.

After prepping the limb I then use a straight edge to sketch out the handle of the ax, as seen in the picture directly above.

I then proceed to sketch out the entire ax with the handle extending outward with the limb of the tree and the ax head in the body of the branch. Next I then begin cutting out the shape of the ax while keeping in mind that the head of ax needs to end up near the center of the stump.

I will conclude the carving of my ax-in-the-stump with a final posting as soon as I can grab a few minutes to do so. Thanks for taking a look at a project which is fun, moderate in skill level, and a nice challenge if you're looking for something that will generate a lot of inquisitive conversation.