WIP: Indian From Core Of Red Cedar (part 2 of 2)

WIP="Work in Progress"
A few weeks ago I began carving an Indian warrior inside a very nice piece of eastern red cedar where part one can be found here. I carried it around everywhere I went for several days and continued carving on it whenever I could.

As you can see from the picture to the right as it sits on the steps of my house this warrior is now finished. Standing 9" tall with a 2" diameter it isn't too overwhelming and will draw just the right amount of attention from its place on the showcase shelf where it will remain, unless... someone pulls out a hundred dollar bill. (Ha) Don't laugh too hard because that's exactly what happened about ten years ago when I finished a very similarly carved Indian in a piece of red cedar. I told the kind lady that it wasn't for sale because I really liked it and wanted to hang on to it. She then proceeded to pull out a one hundred dollar bill when I then told her that I could "learn" to live without it.

 The carving went very well as red cedar is mostly a pleasure to carve. I used my Flexcut Carvin' Jack the most but I resorted to my macro tools for some of the finer detailing and hard to reach areas.

When the Indian was finished I then decided to add a Thunderbird just above his head as seen in the pictures to the left. This was a simple and very shallow low-relief carving because I wanted only the creamy white "surface" wood to show. I then went on to burn in some outlining of the design then added some very watered down acrylic paints for a touch of color.

The final finish consisted of a light sanding then a couple coats of gloss polyurethane. Only the face of the Indian, the Thunderbird, and the very top of the wood received the high gloss. I only hand rubbed a dull polyurethane finish into the surrounding wood for a "complete" seal and a nice contrast.

This one's not for sale at any price!
Well.......maybe I'll think about it if some kind soul just happens to pull out a hundred dollar bill. :)

WIP: Indian From Core Of Red Cedar (part 1 of 2)

 WIP="Work in Progress"

Eastern red cedar has always been one of my favorite "found" woods for carving. Because of it's sharp contrast in colors between red and white, this is a very appealing wood for making everything from simple carved nameplates to making a jewelry chest. When I was a counselor the kids in my group valued its carving properties so much that they created their own monetary system using the wood as a valued trading item. Needless to say that we had to put a stop to that but it goes to show that eastern red cedar has always been a valued wood for carving.

I just recently re-found the piece of wood used for this project from where it had remained hidden for many years under a woodshop table. During a cleaning mission it was a great find so I decided that I'd put an Indian into it. Looking at the first pictures above you can see what a fantastic center of core red wood that this cedar had... just at the right proportion to white surface wood to make it ideal for an Indian warrior carving. This carving will only require a clear finish when completed because painting it would bring ruin.

For the most part I am very pleased with the results so far. With the Indian finished I then decided to add some supplemental surface carvings around the main carving and the Thunderbird is the first. I was careful not to go too deep because I will later lightly add some hints of color to this one and I only wanted the upper layer of white wood to show. Not sure what I'll do next but I'll let you know when I get there.